All your concerns are here. Watch the 2019 Shanghai Auto Show first (I)
[Pacific Auto Network] There are still two weeks before the opening of the 2019 Shanghai Auto Show. The lineup of this Shanghai Auto Show is very strong. Whether you are European and American powder, Japanese and Korean powder or your own brand powder, there may be something you want to pay attention to here. Before it’s too late, we’ll warm up a wave before the auto show, and see the Dream Car in the hearts of all the spectators.
BMW Brilliance’s new generation 3 Series (standard axis code G20/ long axis G28) has already appeared in China before, and will be launched at this year’s Shanghai Auto Show. In addition, the new car will be officially put into production at BMW Brilliance Tiexi Factory in May this year, and it is expected to be listed in the same month.
New generation 3 series standard axis
New generation 3 series long axis
The net area of the new generation 3 series has increased, and the middle connection has become integrated. In addition, the design of "opening the corner of the eye" has been used, and the front face has a strong sense of integrity. Compared with the cash, the internal light source of its headlights has been greatly changed, and the spoon-shaped daytime running light is the latest product of BMW.
Although the wheelbase has been lengthened, the outline lines of the overseas version of the 3 Series (G20) are still completely retained on the side of the car body, and the L-shaped logo at the position of the rear window of the current 3 Series long-axis version no longer exists on the new car. The exhaust and L-shaped ventilation holes at the rear of the car highlight the sporty temperament of the whole car.
According to the application information, the length, width and height of the new generation BMW 3 Series long-axis version are 4829/1827/1463mm, and the wheelbase is 11cm longer than that of the standard-axis version, reaching 2961mm (the size of the whole vehicle has exceeded that of the standard-axis 5 Series E60), and the curb weight is 1630kg.
In terms of configuration, the new car provides different styles of front/rear bumper, middle net, rear spoiler, outer rearview mirror shell, reversing image, front camera and body logo according to different models, and there are also six styles of wheels to choose from.
According to the 325i application information obtained before, the new car is equipped with a 2.0T low-power version engine, code B48, with a maximum power of 135kW(184PS). This power is the same as the current 320i, but it has become 325i after replacement. In addition, the new generation 3 Series is expected to provide a 2.0T high-power engine and a 1.5T engine.
Brand-new-will be launched at this year’s Shanghai Auto Show. Judging from the configuration list obtained before, the design and configuration of the new car are full of science and technology. It is reported that the new car will be put into production at the FAW-Volkswagen Changchun plant and will be officially listed in the second quarter of 2019.
The new generation Audi Q3 adopts the latest design language. Large polygon meshFit both sidesAngular and layeredAir inlet designMake the new car look very sporty.
The side waistline of the new domestic Audi Q3 is consistent with the overseas version, and the design is fashionable and dynamic. With the silver decorative strips and black side skirts, it shows the temperament of urban sports. In terms of appearance configuration, the new Audi Q3 will provide two different styles of appearance kits, ordinary and S-Line, with 10 different colors of car paint to choose from, and four different styles of wheels with two different sizes (18 inches and 19 inches respectively) can be installed.
According to the previous application information, the length, width and height of the new car are 4481(4495)/1848/1616(1584)mm and the wheelbase is 2680mm according to different kits. The domestic Q3 has not been lengthened, which is consistent with the overseas version.
In the interior part, according to the previous spy photos, the new domestic Audi Q3 is basically the same as the overseas version of Audi Q3, adopting Audi’s latest family-style virtual cockpit design, and the effect is avant-garde. The new car comes standard with full LCD instrument and LCD central control panel, and it is divided into two combinations according to different configurations: 10.25-inch instrument +8.8-inch central control panel and 12.3-inch instrument +10.1-inch central control panel.
The central control panel is built with Audi’s latest generation MMI interconnection system, which can support Apple CarPlay and Android Auto interconnection. The rear seat has a bright spot. In addition to being reclined, it also has a 7-level adjustable backrest function, which improves comfort. In terms of technology configuration, the new car is equipped with ACC active cruise and the unique rear traffic warning system.
In terms of power, the new Audi Q3 will provide 2.0 and 1.4T, in which the 2.0T engine is divided into high/low versions, which are 162kW(220PS) and 137 kW (186 PS) respectively; The maximum power of 1.4T engine is 110kW(150PS). In terms of transmission, the new car is fully matched with 7 speeds, and the high-profile model is equipped with Audi’s latest multi-chip four-wheel drive system.
Audi Q2L e-tron is based on Q2L fuel version. As a pure electric drive model, it adopts the design of closed middle net to highlight its identity as a new energy source.
In terms of appearance, the new car adopts a family-style design style. Because it is a pure electric vehicle, the front grille is closed, which is one of the ways to distinguish the pure electric version from the fuel version. The headlights of the new car are designed with great atmosphere, and the interior LED strip is very eye-catching. There is no fog light on the front enclosure, and a closed design is also adopted.
The length, width and height of the new car are 4237/1785/1548mm, which is 2628mm, only 1mm longer than the fuel version, which should be because the front and rear enclosures are different from the fuel version. The design of the rear is basically the same as Q2L fuel version, and the rear logo is changed to 30 e-tron. In addition, the new car will be equipped with 17-inch wheels with a size of 215/55 R17. According to the relevant application information, the new car will provide three different styles of wheels to choose from in the future.
In terms of power, the new car will be equipped with a lithium battery pack from Contemporary Amperex Technology Co., Limited and a 100kW(136PS) motor.
Mercedes-Benz EQC, the first model of Mercedes-Benz EQ brand, will be launched at the Shanghai Auto Show in China, and will be rolled off the production line and officially listed at the end of 2019. The estimated price range is 500,000-600,000, and the NEDC battery life will reach 450km.
As a medium-sized pure electric SUV, the new car adopts a closed air intake grille, and chrome trim is used inside the grille. Headlights adopt a more atmospheric design, which extends from both sides to the middle net in a penetrating way, highlighting the overall sense of the front. The length, width and height of the new car are 4774/1923/1622mm and the length is 2873mm respectively. According to the relevant application information, the new car will provide eight different styles of wheels to choose from in the future.
Overseas version of EQC official map
In terms of interior, the new car adopts the latest family-style design language, and the dual 10.25-inch full LCD screen looks full of technology. In addition, the new car will also be equipped with the latest version of MBUX car system.
It is reported that the new car provides five driving modes and five energy recovery adjustments, which can be operated by the driver through the buttons on the steering wheel. In terms of power, the new car will be equipped with two 150kW(204PS) motors, which are 700 N m.
Dongfeng Nissan’s new generation Sylphy adopts Nissan Vmotion 2.0 design language, and its overall style is like a scaled-down version of the new Scorpio, while the power part is still equipped with a 1.6L naturally aspirated engine. In addition, it is expected that the car will be officially listed this year.
The new Sylphy offers three different appearance configurations.
In terms of appearance, the new Sylphy adopts the flat design language of Nissan Vmotion 2.0, and its shape is more sporty and personalized. In the front face, the iconic large V-shaped chrome-plated decoration is combined with the honeycomb air intake grille, and the new headlight group design on both sides is more fashionable, while the fog lamp area below also adopts angular shape, changing the image of elegance and moderation.
On the side, the new car has many sharp waistlines criss-crossing, and blocks are formed by lines, creating a full sense of muscle. The wheels below are also brand-new 17-inch five-spoke wheels, and two 16-inch wheels are provided according to different configurations, and the tires are matched with 215/50R17 and 205/60R16.
In the tail part, the tail design of the new car is relatively simple, and the taillight shape is adjusted compared with the current model, which has a strong sense of design. In terms of body size, the length, width and height of the new car are 4641/1815/1450mm and the wheelbase is 2712mm, which is improved compared with the current models.
In terms of configuration, the new Sylphy provides skylights, different styles of headlight groups, front fog lights and wheels for optional installation. In terms of power, the new car is still equipped with a 1.6L naturally aspirated engine, with a maximum power of 102kW(139PS) and a top speed of 190km/h, and supports the national six emission standards. And the transmission part matches the CVT gearbox.
Porsche has officially announced the manufacturer’s suggested retail price of Porsche Cayenne Coupe, its first coupe SUV model, of which the suggested retail price of Cayenne Coupe is998,000 yuan, Cayenne Turbo Coupe suggested retail price is1.908 million yuanThe new car will be officially unveiled in China at this year’s Shanghai Auto Show.
In terms of appearance, the front face design of the Porsche Cayenne Coupe basically maintains the design of the current Porsche Cayenne, and the lines are sharper. The biggest change of the new car is concentrated on the side and rear of the car. The roof line of the new car extends downward from the rear, and the smooth arc outlines the slip-back body shape, which together with the window frame line constitutes a slender C-pillar shape.
The height of the front windshield and A-pillar of the new car is lower than that of the Cayenne because it is lowered by about 20 mm at the edge of the roof. The redesigned rear door and tail wing widen the shoulder of the new car by 18 mm, making the whole car more muscular. In the rear part, the Porsche Cayenne Coupe still uses penetrating taillights, and the rear license plate frame is integrated in the bumper, which reduces the visual height as a whole. Combined with the diffuser under the rear bumper and the two sides, it is full of movement.
The interior design of the Porsche Cayenne Coupe is basically the same as that of the current Porsche Cayenne. Both of them are equipped with Porsche Active Aerodynamics System (PAA), which includes a roof spoiler and a new adaptive rear spoiler. The spoiler is seamlessly integrated with the profile of the side of the car body, and spreads 135 mm when the vehicle speed reaches 90 km/h, thus increasing the contact pressure of the rear axle and improving the efficiency of PAA. The roof design adopts the sports car style of Porsche 911 GT3 RS, and provides two design concepts: the standard panoramic glass roof and the optional carbon fiber roof.
This new car release will have two high-performance engine versions: the new Coupé is equipped with a 3.0-liter six-cylinder turbocharged engine with an output power of 250 kW(340 PS) and a peak torque of 450 N m. Thanks to the standard Sport Chrono components, the new car accelerates from standstill to 100km/h in only 6 seconds; The acceleration of 100 kilometers can be shortened to 5.9 seconds with the optional lightweight motion components. The maximum speed of the vehicle is 243 km/h. The flagship model Cayenne Turbo Coupé is equipped with a 4.0-liter V8 twin-turbo engine, with an output of 404 kW(550 PS) and a peak torque of 770 N m. It takes only 3.9 seconds to accelerate from standstill to 100km/h, with a top speed of 286 km/h.
BMW X7 was built on BMW’s brand-new CLAR platform and adopted the latest family-style design language. It was first launched at the Los Angeles Auto Show in November 2018, and at this year’s Shanghai Auto Show. Previously, a BMW dealer in Guangzhou announced that the pre-sale price of the new BMW X7 was 1.039 million yuan.
In terms of appearance, the new car has the largest kidney grille in BMW history, which is highly recognizable. The waistline of the new car, which starts obliquely from the front fender and extends to the taillights, is similar to that of most BMW cars. The M Sport enclosure assembled by the real vehicle is similar to the M Sport enclosure of other BMW models. The lines are capable and powerful, and the air intake area is huge. The fog lamp area is decorated with L-shaped chrome trim.
In terms of body size, the length, width and height are 5151/2000/1805mm respectively, reaching 3105 mm. The interior uses the latest family-style design language, and its shape and layout are basically the same as the new X5, with a 6-seat /7-seat layout (depending on whether independent seats are selected in the second row).
The new car adds a lot of electronics and technology, and is equipped with a 12.3-inch full LCD dual screen. The central control screen has built-in i-Dive 7.0 system, which has many advanced functions such as multi-gesture control, intelligent interconnection and natural speech recognition. The new car adopts a new "crystal" electronic gear handle with exquisite and high-grade attributes, and the setting of a large skylight adds icing on the cake to its luxurious atmosphere.
In terms of power, BMW X7 offers four models in advance: xDrive 50i, xDrive 40i, xDrive M50d and xDrive 30d. The new car comes standard with a four-wheel drive system, and the transmission system matches 8 speeds. Among them, the xDrive 50i model will be equipped with dynamic operation kit and off-road kit, and will be equipped with adaptive air suspension as standard. Its 0-96km/h acceleration takes only 5.2s. The new car will also provide four driving modes, including rocks, gravel, sand and ice, to cope with various harsh road conditions.
The popularity of the new generation has made people sweat. Fortunately, Mercedes-Benz has not kept consumers waiting for too long. The new generation GLE (code name V167) of Mercedes-Benz has arrived at the store and officially appeared at the Shanghai Auto Show. It is expected that the new car will be listed in the second quarter of this year. Compared with the current models, the new car has an all-round upgrade in appearance, size, power and chassis.
The overall design of the new generation GLE is more rounded, and the size of the air intake grille is larger than that of the current model. For the first time, it provides two appearances: off-road kit and sports kit. The iconic three-pronged star LOGO with a more three-dimensional double horizontal banner design makes the new car look more powerful. The headlight group adopts a combination of double L-shaped matching groups, and the exaggerated front bumper is decorated with fish scales, and chrome-plated decorative strips are added on it.
The side of the new car is similar to the front face, and both "faded" the tough guy temperament of the previous generation models and became more refined and luxurious. The unique C-pillar design is the iconic shape of the car in the Mercedes family. At the same time, a five-spoke rim with 20-inch blackening treatment and a taillight group similar to willow leaf are used.
The interior of the new car also ushered in innovation, in which the dual digital display will adopt semi-independent design, including a 12.3-inch full LCD instrument panel and a 12.3-inch central control LCD screen, while using the MBUX(Mercedes User Experience) system.
The air outlet of the central air conditioner will be changed to a square design, and a central handle will be designed below. The COMDAN controller will replace the existing round knob with a larger touch panel.In addition, brand newMultifunction steering wheelIt will have 18 control elements, equipped with a Dual Thumb Controls system and an independently adjustable seat in the rear row. On the whole, the new generation of Mercedes-Mercedes GLE’s style has changed its old-fashioned image.
Due to the increase in wheelbase, rear seat passengers can now enjoy more spacious legroom. Another good news is that the new generation of GLE can also be equipped with a hidden one. In this way, the gap between it and its big brother GLS is getting smaller and smaller.The new generation GLE has also upgraded the second row of seats as a whole, with a folding ratio of 4:2:4, in which the left and right seats can be adjusted by six electric devices, and the front and rear adjustment distance can reach 100mm, and the backrest and headrest can be adjusted, so that the rear passengers have a better riding experience.
The new Mercedes-Benz GLE is based on the new MHA modular architecture, which is derived from the MRA modular architecture and will become the foundation of all the next-generation longitudinal rear drives of Mercedes-Benz except the G-class. In terms of power, like CLS450, the new GLE450 is equipped with a 3.0T L6 engine and a +48V micro-hybrid power system to replace the existing V6 engine. According to the new CLS, the M256 engine can reach 270kW(367PS) with a peak value of 500N·m, and its transmission matches the 9AT gearbox.
In addition, Mercedes-Benz will also launch an environmentally-friendly GLE PHEV plug-in hybrid model, which is expected to be equipped with a high-power version of 2.0T and a motor with a maximum output of 90kW, and the maximum battery life of pure electricity is 50km. Of course, the more violent output is the AMG GLE63 model. The 5.5L V8 is no longer self-priming, and it is replaced by a 4.0T V8 engine without any suspense. The new generation of GLE’s four-wheel drive system can realize complete torque distribution on demand. It is worth mentioning that the new generation of GLE will also provide an E-ACTIVE 48V active suspension system, which can control the air and damper of each wheel independently, thus further reducing the road bumps and roll. In addition, the car will be the first to be equipped with a new generation of Mercedes-Benz driver assistance system.
The replacement model of Changan CS75 — — CS75 PLUS will be launched at this year’s Shanghai Auto Show, which is exactly the Changan S311 (internal code) that we reported before. Compared with the current CS75, the new car has all-round innovation and upgrade, and the appearance is completely new. The power system is equipped with 2.0T+8AT powertrain.
Changan CS75 PLUS, which uses a brand-new design language, has two styles: the ordinary version with a biased temperament and luxury, and the S version with a sporty and fashionable route. The front face of the new car is equipped with a huge inverted ladder-shaped grille, which is connected with the headlights with very sharp eyes on both sides. The strip-shaped LED light strips inside the lamp group extend towards the middle and connect with each other, forming a transverse daytime running light strip, which is very avant-garde and has strong visual appeal.
The middle net of the ordinary version CS75 is composed of chrome-plated decorative strips arranged horizontally, while the middle net of the S version is composed of black decorative blocks arranged in an array. Decorative openings (air guides) on both sides of the front enclosure, the S version is obviously larger and more concave, and is decorated with red decorative strips symbolizing movement. In fact, the front surround of the normal version has a very fashionable and dynamic taste.
The profile of the side of the car body is tough, and the lines of the door and fender are rich. Starting from the front fender, the waistline slightly raised and finally closed at the taillights is very sharp, bringing a full sense of strength to the side. The folding line under the door makes the new car have a good light and shadow effect under the light.
The irregular taillights of the new car are very special, and the interior LED strip outlines its shape. The exhaust from both sides is consistent with the positioning of the roof rear spoiler and the young sports of the whole vehicle.
The power system is the biggest highlight of CS75 PLUS. The car will share the Blue Whale 2.0TGDI engine with CS85 COUPE, with a maximum power of 171kW(233PS) and a peak torque of 360N·m, matching the Aisin 8-speed automatic manual transmission.
Domestic production will be launched in 2019. At present, the price of imported XC40 is 32.18-41.18 million. After domestic production, the entry price will be reduced to less than 300,000, and it is expected to be officially listed in May. According to the previous declaration information of the car, there is almost no difference between the new car as a whole and the imported version.
Both Volvo XC40 and Volvo XC40 are based on CMA platform. In terms of appearance, the domestic XC40 will have a variety of design styles, such as different air intake grille shapes, different front and rear enclosures and rims. And the new car will still provide a two-color painting style, and the roof and body will achieve better visual effects by contrasting colors.
In addition, the new car provides a variety of optional configurations, such as two-color body, black roof rack, rear bumper trim, front bumper trim, tail logo and black exterior rearview mirror, which is full of personalization. In terms of body size, the length, width and height of the new car are still 4425/1863/1652mm, which is 2702mm, which is completely consistent with the current imported models.
In terms of configuration, the new car provides front and rear cameras, panoramic reversing image system and rim sizes ranging from 18 inches to 21 inches, with four specifications, while the sizes are 235/55 R18, 235/50 R19, 245/45 R20 and 245/40 R21 respectively.
In terms of power, the new car will use three kinds of power, 1.5T133kW(181PS), 2.0T low engine with a maximum power of 155kW(211PS) and 2.0T high-power engine with a maximum power of 205kW(279PS).
The high-performance version of the Lectra 03 was unveiled at the Shanghai Auto Show. As a production version of the Lectra 03 Cyan concept car, the new car is believed to be very radical in the adjustment of the chassis and power system.
The Lectra 03 Cyan concept car was jointly built by Lectra and Cyan Racing. The car is based on the Volvo S60 racing car and is dressed in "Arctic Blue" similar to the current Volvo high-performance models. The outline of the new car is the same as that of the Lexus 03 currently on sale, but the details are completely different. The Lexus 03 Cyan concept car is a very competitive and fighting look.
The most obvious difference between the front part and the normal version is that the front fender has been treated with a wide body, which greatly enhances the momentum and strength of the front face and is also compatible with the wheels with more "explosive" data. The front enclosure has been redesigned, the trapezoidal air intake grille in the middle is huge, and the huge intercooler inside is enough to show the powerful performance of the car. The raised hood and blackened headlights also correspond to the positioning of the Lexus 03 Cyan concept car as a high-performance car.
The side of the car body is very stylish, and the opening of the front fender, the large-sized tree-shaped wheels and the extremely low posture of the car body create a very aggressive feeling. Multi-piston front brake calipers with large-size scribing discs are very full, and the rear brakes are slightly "thin".
The radical degree of the rear of the car is not inferior to that of the front. The most eye-catching thing is the large tail and the exhaust of both sides. This set of exhaust layout is quite similar to Lexus RCF/ previous generation ISF, and it looks very competitive when it is matched with the exaggerated diffuser at the lower part. Viewed from the oblique rear, the wheel hub of the car is almost flush with the wheel eyebrows and the large negative inclination angle of the wheel (especially the front wheel) makes its visual impact far exceed that of the ordinary version of the Lexus 03.
In the official map, we can see that the Lectra 03 Cyan concept car is equipped with a roll cage, but its production version will not have such competitive equipment in the future, and its appearance will be much more conservative.
In terms of power, the Lectra 03 Cyan concept car is equipped with a 2.0T turbocharged engine, which has a red line of 8000rpm, a maximum power of 394kW(536PS) and a peak torque of 504N·m, matched with a 6-speed sequential gearbox and a front drive. In the future, the production version of the car will adopt or will adopt a 2.0TD T5 high-power engine from Volvo, with a maximum power of 187kW(254PS).
Lexus officially released a preview of its brand-new model earlier, and announced that the model will be launched in the world at the Shanghai Auto Show. According to the preview, we still can’t see what kind of car this car is, but Lexus registered the trademarks of "LEXUS LM350" and "LEXUS LM300h" in China earlier, so the new car will be an MPV model named LM.
From the preview, the new car adopts Lexus’ latest family-style facial makeup, and the spindle-shaped air intake grille is designed with a mesh structure. The headlights are composed of three matrix beads, and the hooked LED daytime running light below is very eye-catching.
The product layout of Lexus is very perfect, ranging from compact cars to large /SUV. On the analysis of conventional models, there are only no small cars and MPVs, and Lexus calls this model a brand-new model. So is it possible that it is a Lexus version of Toyota Erffa or a brand-new small car? Let’s wait for the announcement of the Shanghai Auto Show.
Earlier, the spy photos of GAC Chuanqi’s new generation GA6 have been exposed. The new car will apply Chuanqi’s latest family-oriented internal and external design, and will abandon the classic Alfa Romeo platform of the current GA6 model. (Spy photo: Sina Weibo @ 京京京京京京京京京)
Looking at the front of the car, although the new car is wearing layers of camouflage, it can still be seen that it shares many shapes with GM6: the hexagonal air intake grille is stable and atmospheric; The headlight group whose shape and detail design are very similar to GM6 is full of exquisiteness; The taillight group may also adopt a through design similar to GM6.
Ten-spoke sports wheels+Michelin tires on the test car
Entering the car, the interior of the new car has also undergone tremendous changes, just like the GS5 model that was launched shortly: the large-size instrument panel+central control screen, the gear area design similar to the GS5, the high armrest in the center, and the first-class leather seats are impressive.
In terms of power, the next-generation GA6 will adopt the 4A15M1 and 4A15J1 with the same model as the GS5, and match the Aisin 6AT gearbox and 6MT gearbox. Among them, 4A15M1 engine was mounted on an earlier Chuanqi vehicle, which was 112kW(152PS) with a peak value of 235N·m；; The updated 4A15J1 1.5T engine can reach a maximum of 124kW(169PS) with a peak torque of 265n m.
SAIC Motor brand announced earlier that the brand-new and new-generation Chuangkuo Tracker will be launched in the world at the 2019 Shanghai Auto Show. As a member of GM’s next-generation global vehicle series, the new generation Chuangkuo will be equipped with the latest drive technology and intelligent interconnection technology, with a stylish and personalized appearance and practical and rich configuration.
Official preview map
Previously, we have obtained a set of declaration drawings of Chevrolet brand-new Tracker. In appearance, the Chevrolet family-style design is adopted, and the large-size polygonal front grille brings strong visual effects to the front face. The headlights on both sides are connected with the front grille above, and the inverted L-shaped air intakes on both sides create a strong youthful and dynamic atmosphere.
On the side, the powerful multi-waistline design shows a certain sense of muscle, while the tail design is simple, which is in sharp contrast with the front face design style. In terms of body size, the length, width and height of the new car are 4270/1791/1602(1627)mm and 2570mm respectively.
In the future, the new car will also launch models with different appearance styles. Judging from the options such as blackened head/taillights, front grille, rearview mirror and rims, the new Chevrolet Tracker will launch the Redline Shang Red version. In terms of power, the new car will be equipped with a 1.0T three-cylinder which is 84kW(115PS) and is expected to match 6 speeds.
BYD brand new — — It will be launched at this year’s Shanghai Auto Show, and the new car will adopt the latest Dragon Face 2.0 family design language and belong to the series. As early as 2015, the information of this brand-new plug-in model of BYD was exposed. It is reported that the acceleration time of the strongest version of the new car is expected to reach 2.9s, and the linear acceleration ability can be comparable to P100D.
BYD Han is positioned as a medium-sized sedan with a length, width and height of 4,950/1,890/1,490 mm, which is 2940mm, and it is expected to become BYD’s new sedan. In terms of configuration, according to the information previously exposed, the car is expected to be equipped with ACC adaptive cruise, head-up display, lane keeping assist, electric, and induction-openable trunk.
In terms of power, the new car will be equipped with BYD’s latest plug-in hybrid system, which consists of a 2.0T engine and a 110kW(150PS) motor. The four-wheel drive version will also be equipped with a 350kW(476PS) motor on the rear axle, and the acceleration time per 100 kilometers may reach 2.9s.
According to foreign media reports, Volkswagen will release a pure electric car currently code-named I.D. Lounge at the 2019 Shanghai International Auto Show, which opened in April. The new car will be positioned as a luxury seven-seat SUV, and its appearance and size will refer to the design of the current Volkswagen Touareg.
I.D. Buzz
It is reported that the new car will be built on the Volkswagen MEB platform like I.D. Buzz, and the wheelbase will reach 3,300 mm. It is planned to achieve mass production in 2021, when it will compete with Tesla. In addition, the new car will be equipped with a four-wheel drive system, or adopt the same power system as I.D. Buzz, consisting of dual-drive motors arranged at the front and rear axles respectively, with an output power of 270kW(367PS), a battery pack capacity of 111kWh, and an endurance capacity of more than 600km.
Dongfeng yueda Kia brand-new K3 has the same appearance as the overseas version, but the front face has been localized after being made in China. The new car will be equipped with a 1.5L/1.4T engine and provide plug-in hybrid models, which will be launched in June this year.
Fuel version model
PHEV model
As can be seen from the declaration, the shape of the front face of the new car has been greatly adjusted. The fuel version adopts a sharp lattice grille, which is very aggressive, while the PHEV model adopts a straight waterfall grille, and the headlights adopt a polygonal sharp shape, and the internal structure of the lamp cavity is more complicated. In addition, the new car also adopts a smoother front enclosure shape, and the front and rear enclosures of PHEV models are decorated with blue strips to show their identity.
As for the tail, the overseas version of the penetrating taillights has been retained, which makes the tail shape more fashionable and compact, but the shape of the internal cavity of the taillights is different from that of the overseas version. At the same time, the rear enclosure of the domestic version has also been optimized, including through chrome trim and bottom diffuser, which make the rear look more sporty. In terms of body size, the length, width and height of the new car are 4660*1780*1450mm and the wheelbase is 2700mm respectively.
Fuel version model
PHEV model
In terms of interior, the new car will retain the center console design of the overseas version K3, including a brand-new suspended central control panel, air conditioning outlet and central control panel. In addition, the domestic K3 has been optimized in some configurations, for example, the electronic handbrake is adopted to replace the mechanical handbrake of overseas models, and the new car will also be equipped with a rear air outlet. On the whole, the interior of PHEV model is the same as that of the fuel version, and only blue elements are added to the air-conditioning outlet, baffle and seat for embellishment.
As for power, the new car will provide three power systems: 1.4T, 1.5L and plug-in hybrid, of which 1.4T and 1.5L engines are 95.6kW(130PS) and 84.5 kW (115 PS) respectively; The PHEV model will be equipped with a 1.6L engine with a maximum power of 77.2kW(105PS) and form a plug-in system with the motor.
According to the official of SAIC MG, the new (2019) MG 6 will be listed at the 2019 Shanghai Auto Show. Compared with the cash, the new car has added the exclusive black knight of Trophy, and the sense of movement of the whole car has been improved to a certain extent, while the emissions meet the national six standards.
The new MG 6 continues the styling design of the current model, and the lattice mesh similar to the inverted trapezoid is connected with the slender and sharp headlights on both sides. The front line is simple and has a sense of integrity. The side of the car is designed with a sliding back, and the smooth roof line and the sharp waistline are full of movement. The new car has added Trophy’s exclusive black knight sports kit, the color of the middle net frame, the exterior rearview mirror and the side window frame has been changed to black, the headlight group has been blackened, and the five-spoke wheel hub has also been sprayed with black. In addition, it also provides exhaust with valves, which significantly improves the aggressiveness and sportiness of the vehicle appearance.
The appearance of the interior of the new car is consistent with the current model, offering a very sporty red and black color scheme. In terms of configuration, the new car will provide stereo, 360 reversing image, XDS curve dynamic control system and ESC body electronic stability system according to different models.
In terms of power, the new MG 6 is equipped with a 1.5T engine, with a maximum power of 124kW(169PS) and a peak torque of 250N·m, matching with 6-speed manual or 7-speed.
BAIC New Energy’s brand-new — — Beiqi New Energy EX3 will be officially launched at the 2019 Shanghai Auto Show, and the new car has absorbed the design elements of the EX3 concept car in appearance. In terms of details, the front of the new car has elegant headlights, and the split headlights correspond to the U-shaped mouth on the front face.
Viewed from the side of the car body, its overall lines are stretched, and one of the waistlines runs from the front wheel eyebrows to the rear taillights, which makes the car look more compact. In terms of the tail, the new car adopts the popular penetrating taillight group, which makes the rear look more compact and dynamic, and the recognition is quite high after lighting. In terms of new car size, its length, width and height are 4200*1780*1638mm and its wheelbase is 2585mm respectively.
In terms of interior, the new car adopts dark color as the main color, and similar wood grain and chrome-plated elements are added to the details of the door trim and the center console for embellishment, which has a high overall texture. At the same time, the car is equipped with a dual-spoke multi-function steering wheel, a suspended central control LCD screen and a knob shift mechanism, which enhances a lot of scientific sense for the interior.
In terms of power, the new car is equipped with a driving motor with a maximum power of 160kW(218PS), and uses ternary lithium batteries produced by Beijing Puulaid New Energy Battery Technology Co., Ltd. or Contemporary Amperex Technology Co., Limited New Energy Technology Co., Ltd. as the energy source.
New Energy will launch a brand-new pure electric vehicle this year. The internal code of the new vehicle is A12, or it will be named AION X. It is reported that the new vehicle will form a direct competition relationship with. The new car will be built based on the second generation GEP(GAC Electric Platform) pure electric platform, which is centered on electric drive and battery, so as to maximize the seating space and cabin space.
Guangzhou automobile new energy Aion S
Mr. Gu Huinan, general manager of GAC New Energy, said in an interview: "Aion" will be made into a series. In addition to the pure electric car Aion S, SUVs and models with solar panels will be provided later. Among them, GAC New Energy allocated 428 million R&D funds for A12 project, with a total investment of about 702 million yuan.
BMW’s brand-new X3 M/X4 M was launched in the world at this year’s Shanghai Auto Show. Among ABB’s top three, BMW, which loves to emphasize sports characteristics, will let the "dessert-class" market of medium-sized SUV be the only one?
What is the most important appearance change of the new BMW model? Of course, it is a bigger air intake grille. On X3 M/X4 M models, the blackened "double kidneys" grille looks very pleasing to the eye, which contributes a lot to shaping the power of the front face. Since the discovery of X5 M/X6 M combination boxing, the smart BMW has quickly delegated this trick to a lower X3 M/X4 M car series, attracting a wider range of potential customers.
Carbon fiber, enriched in the appearance details of the two cars: carbon fiber front lip, carbon fiber air intake, carbon fiber rearview mirror, carbon fiber exhaust decoration & HELIP; … Although it can’t actually reduce much weight, it is still quite visually sensational. Both new cars are available.Seven kindsPaint colors are available, including Toronto metal.red、Donington metal ash.
If you blindfold and throw it into one of these two cars, I believe you won’t know which one it is. After all, the wrapping of the front sports barrel chair, the steering wheel of the thong with shift paddle/mode selection, the chicken leg gear handle and the iDrive system are almost the same.
The two new cars come standard with three-zone air conditioning, and can be equipped with heating steering wheel, snowboard bag, Ambient Air fragrance system, carbon fiber decoration, HUD, mobile phone wireless charger, gesture control, online digital entertainment and other functions.
Although the 3.0T S58 engine is smaller than the rival V8T engine, with the addition of a bunch of high technologies, it can achieve excellent results in terms of speed response, running smoothness and even fuel consumption performance. At the same time, the lighter front weight brought by S58 engine can prevent X3 M/X4 M from going to the crooked road of "straight line king, dead corner".
Through the Drivelogic button on the gear lever, the driver can adjust the three-level shift mode. From level 1 to level 3, the number of revolutions of the upshift will be delayed, and the shift speed will be increased step by step. The throttle response near the gear handle, the soft and hard knob and the steering wheel assist knob are also within reach, which perfectly fits the driver’s thinking.
The pre-sale price will be announced at this year’s meeting. The appearance of X is based on F7. Except for the rear design, the appearance similarity is very high, which is the same as that of X4. Of course, at the Shanghai Auto Show in April 2017, HB-03 coupe was released, which can also be regarded as the predecessor of F7x.
The interior of F7x is still designed based on F7, and there is no obvious change in shape, but the overall style has been adjusted younger, including the matching of burgundy leather and black interior, and the imitation carbon fiber plaque in the passenger seat, all of which are aimed at reflecting the uniqueness of F7x. In addition, F7x has also applied the plastic-lined material and suture design in terms of technology and materials. Although I don’t know its price, there is no obvious difference compared with F7, which is very good.
Haval F7x 2.0T has 165kW/5200-5500rpm, 385 N m/2000-3200 rpm, and its power level is comparable to that of joint venture brands. It is equipped with and independently developed wet 7th gear. In addition, Haval F7x will be equipped with a new generation of 1.5T engine, with a maximum of 124kW/5600rpm and a maximum of 285n m/3000rpm.
The production version of Zotye i-across concept car will be released at this year’s Shanghai Auto Show. The new car explains Zotye’s brand-new 3.0 era design concept of "Taoism, nature, wisdom and beauty".
From the preview, the new car adopts an avant-garde, tough and balanced design style. In the front face design, the straight-line bright strip extends through the upper and lower LED headlights and merges into the turn signal lines. At the same time, it combines the tough, rhythmic and natural designs to create a new balance and transformation.
The overall side of the new car is relatively simple, and the capable side line design is also in line with the current aesthetics. At the same time, the side window also has sharp lines that are obviously inclined to the back.
The rear of the car is round and full, and the narrow and wide lines on the top are combined with the mainstream integrated taillight design, which has a very good impression and aesthetic feeling. Zotye calls this design the balance of heaven and earth. As for the interior configuration and power of the new car, it has yet to be officially announced.
The new cheetah CS10 has been adjusted in the front part, and the technological sense of the interior has been obviously improved.
In terms of appearance, the new front face adopts a straight waterfall grille, and the long and narrow headlights on both sides give people a strong visual impact. The rearview mirror has been redesigned. In order to meet the needs of young consumers, the rear of the car is designed with cheetah’s brand-new family-style through taillights. The blackened falcon-beak taillights maintain a simple design style and bring a bit of luxury.
In terms of interior, the new car adopts beige color matching, supplemented by young and fashionable cloud and tiger stripes, creating a comfortable and simple atmosphere. The instrument LCD screen and the central control LCD screen are designed through, and the super-large screen has a strong sense of technology. The built-in car infotainment system provides users with emergency rescue, navigation service, voice control, real-time traffic inquiry and other related services. The new car also adds rear air outlets and panoramic skylights in the configuration part. Fully meet the actual car demand of most people. In view of the increasing demand of consumers for space, the storage space in the new car is further optimized, and the storage space under the armrest box, air outlet of air conditioner and auxiliary instrument platform is obviously improved compared with the old one.
In terms of power, the new Cheetah CS10 provides 1.5T and 2.0T engines, of which the 1.5T engine has a maximum power of 110kW(150PS) and a peak torque of 210N·m, matching a 5-speed manual or CVT transmission; The 2.0T engine has a maximum power of 130kW(177PS) and a peak torque of 250N·m, matching the 6-speed powershift. Officials said that the brakes, chassis and steering of the new car have also been optimized.
Previously, we obtained a set of declaration drawings of Dongfeng X5 from the Ministry of Industry and Information Technology. The new car adopts a brand-new design language and is equipped with a penetrating taillight set. In addition, we can see the words "popular T4" from the optional tail logo, and combined with the news that Dongfeng Fengxing will launch the popular T4 in 2019, the new car is just the declared model.
In terms of appearance,The new car adopts the latest design language similar to the popular T5, and the front face uses an inverted trapezoidal large-size air intake grille. The headlight group has a sense of design and a complicated internal structure, with a recessed fog light area below. On the side of the car body, the new car is designed with upper and lower double waistlines and equipped with five-spoke wheels to enhance the sense of movement.
In the rear part, the new car is particularly similar to the popular T5. It is designed with a penetrating taillight group and connected with the chrome trim below, and the popular brand English word "FORTHING" is embedded in it. In addition, the new car will adopt a hidden exhaust layout. The new car has a size of 4460/1820/1720mm and a wheelbase of 2720mm, and is expected to be positioned as an entry-level compact SUV.
In the interior part, the new car also adopts many popular elements. For example, the three-spoke multi-function steering wheel, the suspended central control LCD screen and the through air conditioner outlet make the overall visual effect of the car more in line with the aesthetic needs of young consumers. At the same time, its overall color is dark, and chrome-plated elements are added to embellish the details. In addition, the multimedia control area and the air conditioning control area are sequentially arranged below the control screen, with distinct levels.
The new car will provide a variety of grilles, fog lights, skylights, door handle styles, rearview mirror styles, side window decorations and tailgate decorations for consumers to choose from. In terms of body size, the length, width and height of the new car body are 4460/1820/1720mm and the wheelbase is 2720mm, which is expected to be positioned as an entry-level compact SUV. In terms of power, according to the declaration, the new car is equipped with a 1.6L naturally aspirated engine with a maximum power of 90kW(122PS). Whether there are other power configurations remains to be officially announced.
It is learned from the official that the replacement model will be named G20 and will be unveiled at the opening ceremony in April. Recently, the official also announced its preview for the first time, showing that the interior adopts a brand-new design, which is more scientific and technological.
A number of functions are integrated in the central armrest area of the car, which is suspected to be equipped with wireless charging function, which means that the design of the center console is more simple and optimized, and the physical buttons may be reduced.
Spy photo source: Weibo netizen @TYM Yu
In terms of appearance, judging from the spy photos exposed before, the new car is dressed in a brand-new matrix, with the design of the "I"-shaped LED belt above, and the shape is fierce. The area of the front grille of the new car will be further increased and visually more domineering. At the rear of the car, the new car is dressed in a brand-new style, and it is also equipped with a complex dense-spoke two-color wheel hub, which has both design and texture.
The power information has not been released for the time being. With reference to the cash, there are three engines to choose from: 2.4L gasoline engine, 2.0T gasoline engine and 1.9T diesel engine, in which the 2.4L gasoline engine is 105kW(143PS) with a peak torque of 210N·m, and the transmission system is matched with a 5MT transmission. The maximum power of 2.0T gasoline engine is 165kW(224PS) and the peak torque is 345N·m, and the transmission is matched with 6AT or 6MT transmission. The maximum power of 1.9T diesel engine is 110kW(150PS) and the peak torque is 350N·m, and the transmission system is matched with 6AT or 6MT transmission.
Dongfeng fengshen’s brand-new compact car, code-named D53, was built on the new CMP platform, and it was the Dongfeng e&pi unveiled last year. The first production model of the concept car, adhering to the eπ The design concept of.
The D53 is based on the new CMP platform, which is the first mass-produced model in dongfeng fengshen. In terms of appearance, the side of D53 is similar to that of eπ The concept car is similar, retaining the sharp headlight shape and front surrounding structure. In addition, the new car also follows the design of the concept car, which is full of sports.
CMP platform is a new generation of C-class modular platform architecture for global launch demand after 2020, and its greatest advantage is its high flexibility and scalability. According to the official introduction, the CMP platform inherits the European high rigidity gene, which has stronger safety performance and the durability of the platform implements the PSA European standard. In addition, the official said that the new platform inherited the WTCC European champion chassis control gene, and the blessing of lower center of gravity and lower wind resistance will bring more powerful driving and control strength to D53.
In terms of configuration, D53 will use dongfeng fengshen’s sustainable upgrade version of WindLink car system, and is expected to be equipped with L2-level intelligent driver assistance system. As for the motivation, the official has not disclosed the relevant news yet.
Jianghuai Automobile officially released a group of brand-new pure electric vehicles — — S4 official map, and said that the car will be officially listed at the 2019 Shanghai Auto Show. The previously announced pre-sale price after subsidy is13.00-17.00Ten thousand yuan.
JAC iEVS4 has been unveiled in 2018, which is based on the fuel version of JAC S4. The front face of the new car is a typical pure electric car, with a hexagonal closed grille and a charging interface behind the Jianghuai LOGO in the center of the grille. Below is a flat hexagonal air intake, with complex and sharp lines, the front of the car looks well-defined and sporty.
The side lines of the car body are also tough and sharp, and the double waistline setting makes the car side more powerful. Raised lines are designed above the wheel eyebrows, which can create rich light and shadow effects when illuminated. At present, the popular suspended roof also appears on the car body, which fits its fashionable and dynamic vehicle positioning. At the rear of the car, a light strip and chrome trim strips running through the car logo are also arranged between the left and right taillights to form a transverse taillight design, which echoes up and down with the light strip at the lower part of the rear enclosure, with high recognition.
The interior also follows the design of JAC S4. The overall color is black, and at the same time, a large number of chrome-plated elements are added to the air conditioning outlet, the handle area and the door panels on both sides for embellishment, which brings a good interior texture. The car also painted the electronic gear handle yellow, adding a youthful and jumping atmosphere to the interior. In terms of configuration, the new car will provide mainstream technology configurations such as full LCD instruments and large-size suspended central control LCD screens.
In terms of power, JAC iEVS4 is equipped with a driving motor with a maximum power of 110kW(150PS) and a lithium battery pack of 61kWh, with a cruising range of 420 km under NEDC conditions. For more information about this car, we will continue to pay attention.
Lu Feng Rong Yao will make his debut at the 2019 Shanghai Auto Show. It is reported that the design of the new car was led by the Italian GFG company established by internationally renowned fabrizio and Giorgio Giorgetto, and was completed in cooperation with Jiangling Holdings.
In terms of appearance, the front face of the new car adopts a hexagonal large-size air intake grille, and the interior of the grille is decorated with banners and dotted elements, and there is not much silver decoration. The dark middle net is highly recognizable. The shape of the headlights is also quite special. The split headlights combined with the trapezoidal air intake under the bumper are more radical in design style. At the same time, according to the previous information, the wheelbase of the car reached 2760mm, between and.
The side shape of the car body is simple and smooth, which continues the full style of the front face. The shoulder line of the new car extends from the front wheel eyebrow to the taillights, highlighting the sense of strength and creating a low dive posture. The tail shape is more rounded, and there are two exhaust layouts on both sides.
There is no news about the power for the time being, but it is very likely to be equipped with the 1.5T engine code-named LW4G15A on Lufeng Xiaoyao, with a maximum power of 120kW/5400-5700rpm and 250Nm/1500-4000rpm, matching with a 6-speed manual or CVT continuously variable transmission.
The new concept car of Hezhong New Energy is internally code-named EPX, which is positioned in the four-door electric coupe. The new car, with smooth body lines and sharp headlights, will be officially unveiled at this year’s Shanghai Auto Show.
Judging from the design, the body shape of this concept car is very smooth. Among them, the front face adopts Hezhong new energy family design, and its headlight group is connected by a light strip, forming a fountain-like LOGO of Hezhong in the front of the car, which not only forms the visual feeling of penetrating headlights, but also highlights the logo of Hezhong, killing two birds with one stone.
Viewed from the side, the depression at the wheel brow of the new car matches with the large-size rim shape, which looks dynamic and sharp. However, the exterior rearview mirror and door handle are not seen in the design drawing. I wonder if the hidden rearview mirror and door handle will be used in the real car. In addition, the slip-back shape also provides a lower possibility for vehicles to build.
This year’s Shanghai Auto Show can be described as a constant highlight. There are many products worth seeing, both on traditional fuel vehicles and various new energy vehicles. I believe that readers have already looked forward to the Shanghai Auto Show after reading this article. Of course, this list is only a part of the highlights of the Shanghai Auto Show, and we will also launch the next part of the Shanghai Auto Show Preview next week, so please pay attention. (Text: Pacific Auto Network Li Shenghong)